ST-C2 3D/2D Laser Subsurface Engraving Machine

ST-C2 3D/2D Laser Subsurface Engraving Machine is a new laser processing equipment that combines laser technology & computer technology and integrates optics, machinery and electronics together.

It adopts pulse laser and focuses the laser beam inside transparent materials such as glass or quartz to produce nanometer points of vaporous burst. Because the points can constitute splendid picture, pattern and words inside the material controlled by a computer, ordinary transparent material can be made into grade luxurious art wares.

Our series laser subsurface engraving machines are usually used in glass decoration industry, crystal gift industry, glass gift industry, and glass and Plexiglas signs industry. It can also be used in secondary process industry of all kinds of bottles and other transparent materials.

Specifications:
Laser Medium             Diode-pumped solid-state laser
Cooling                       Air cooled
Laser Wavelength        532nm
Pulse Repetition Rate  2 kHz
Pulse Width                7ns
Pulse Energy              1.2mJ
Laser Beam Quality    TEMoo, M2<1.5
Resolution                 500 DPI
Engraving Field          max. 190mm*160mm*100mm
Engraving speed        1500 dots/second
Input Electricity          220VAC/110VAC, 50Hz           
Power Consumption    0.6kW
Dimension                 760mm*560mm*560mm
Weight                      65 kg

ST-C5 3D/2D Laser Subsurface Engraving Machine

ST-C5 3D/2D Laser Subsurface Engraving Machine is a new laser processing equipment that adopts pulse laser and focuses it inside transparent materials to produce nanometer points of vaporous burst.

Combined with German, Russian, Italian machines’ technology, it adopts servo-controlling system with high precision and efficiency under the computer control, which has the features of high production efficiency and stable processing performance. It adopts laser processing technology, which makes the crystal and laser focus point move correspondingly. Laser focus point gasifies the crystal by optical effect, and then forms countless ordered spots, which make up an exquisite and perfect three-dimensional picture.

Because the points can constitute splendid picture, pattern, and words inside glass controlled by computer, ordinary transparent materials can be made into grade luxurious art wares. Its products can give person Crystal-clear and fine noble visual image, that’s elaboration for your decoration.

Specifications:

Laser Type                       Diode-pump solid-state laser

Laser Wavelength             532nm

Pulse Width                     8ns

Pulse Repetition Rate       2kHz (Optional 2k-5kHz)

Engraving Speed              120000-300000 dots/min

Max. Engraving Field        L190mm*W160mm*H100mm

Number of Laser Scanner        1

Cooling                            Air cooled

Power Consumption          ≤ 0.6 W

Control                             Servo-controlled

Focused Beam Diameter   0.02mm

Repeated Precision          0.05 mm

Dimension                       880*480*780mm

Weight                            100 kg

Main Parts of 3D Engraving Systems

We can provide OEMs and system integrators with a range of high performance components and sub-assemblies of 3D laser engraving systems at more attractive prices. The main parts and sub-systems include a control card, a table with driver, a 2D marking head and DC power supplies.

The control card is used to control the table (step motor), position limits of the table, marking head and laser beam on/off. It is inserted onto the mother board of a computer. The drive software and laser engraving software comes with the control card.

The dimension of the table is 365x120x55mm. The length of the screw is 230mm and the travel range is 120mm. There is a position limit on both ends. The signals are given via DB9.

Engraved Samples