IR Laser Beam Detector

A frequency-doubling material is coated on the glass surface. When an IR laser beam is illuminated on the coating material, the frequency of the IR laser beam will be doubled from IR to green wavelength. For 1064nm laser beam, the wavelength will be 532nm which is green.

High Resolution Infrared Viewer

Our Infrared Viewers are designed to provide the highest resolution, longest service life and maximum performance possible in all applications of Fiber Optics, Bio-Chemistry Analysis, Laser beam Alignment and Verification, Semiconductor Inspection, Thermal Emissions, Film processing and Infrared Light Emitting Diodes.

PRODUCT SPECIFICATIONS:

Part number:            STIR3150

Photocathode           Enhanced Multi-Alkali

Spectral Response    0.3 to 1.55 Microns

Resolution                60 lp/mm

Objective Lens          F-1.8 50mm

Weight                     500 grams

Dimensions              153x116x101mm

Power Requirements 9 V DC

Eyepiece                  + or -5 Diopters

IRV Beam Visualizer - Sensitive to 1064nm

Beam visualizer’s are suitable for use with lasers that operate in CW Q-sw, PS.

Spectral Range:           880-1070nm   

Emission Light Colour:  Green            

Threshold Sensitivity:    0.02W/cm2

Operation Aperture Diameter:  35nm

It is advisable to use this tool at low energy levels to avoid any damaged that can occur as an impact or high absorption inside a sensitive material. As a consequence that would. Follow from the damage of the visualizer, the induced contamination cannot be avoided. In addition, the safety procedure for using this visualizer requires you to use protective Spectacles against IR radiation ( also available from Sintec Optronics). Please avoid any direct eye contact to IR light that can be scattered from the surface of the chemical deposition Layer or baseplate.