AOM Driver A36-Series

The A36xxx RF driver series provides up to 2 Watt output power. Various types cover a frequency range from 80 to 350 MHz. The frequency is customizable.

The maximum RF output power is adjustable by an internal potentiometer. The analogue modulation voltage controls the output power from 0 to 100% of the adjusted maximum power.

Additional to the analogue modulation voltage a digital modulation control signal can switch on and off the RF power. An operation scheme below (page 6) illustrates the interaction of the two modulation signals in detail。

Both the analogue and digital modulation are characterized by extraordinary on/off ratios of at least 70 dB.

The driver can be operated with modulation frequencies (analogue and digital) up to 1/4 of the carrier frequency.

Optimum EMC shielding and mechanical protection is achieved by an aluminium casing and a conductive surface passivation. The base plate serves for mounting as well as for heat dissipation.

Key Features:

Frequency range 80 to 350 MHz

RF output power 2 Watt

Optimized for grey-scale applications

RF on/off ratio > 65 dB

Constant output power design: maximum fluctuation ± 5% between cold and warm state

Conductive cooling through base plate

Compact housing, fully shielded (EMC)

Applications:

Fast modulation components for extra cavity applications, e. g. RGB systems

Technical Specifications</